Are You Curious What Technique and Gas Is Used in Flame Cutters

While you are dealing in the steel industry, removing defective steel products is a key factor for automobile industry, white goods manufacturing and lastly for pipeline industries. You can check what technologies is used by the companies by checking the track records. Latest what kind of advanced technique is used by these companies in torch technology.

Know-how about The Technology

Generally iron oxidizes very quickly at the temperature of white heat, in the matter of releasing a substantial amount of heat. Basically, the melting point of iron oxides is much lower than pure iron. So, the oxide that is generated in the position of flame cutting melts quickly than the pure iron. Flame profile cutting machines can be used to cut any shape of steel. While you are using flame cutting technology, the steel has to be pre-heated first. Then a direct stream of oxygen can be used to cut this melted iron.

How You Can Cut the Metal

The metal piece is continuously preheated until the temperature of the white heat raises up to the starting point. The stream of oxygen is used to burn away the pre-heated material. Next, the slag should be removed by the pressure from the oxygen. The chemical reaction is used to release high amounts of energy for preheating the cutting surface of the metal. Now the speed of oxygen is higher than the swiftness of the sonic.

Gas Used in Flame Cutting

There are five gases that are used in flame cutting. These are propane, acetylene, propylene, natural gas and lastly MAPP which is meant methylacetylene-propidine. Performances of the fuel gas is a vital matter in deciding cutting speed, cutting edge quality and pierce time. Apart from it, flame temperature and heat distribution is also an important factor in flame profile cutters.

Flame profile cutting is considered as updated method for cutting steels as low percentage of carbon is used in it and the expense is cost effective too.